Loxeal 70-14 50 ml greenhouse bottle penetrating fillets

Anaerobic adhesive and sealant for low viscosity metals and high capillary penetration power.
Loxeal 70-14

High resistance loxeal brenafiletti with a maximum temperature of 150 ° C.It can be used to block bolts, prisoners, nuts and screws and to avoid loosening caused by stresses and vibrations.It facilitates the screwing of threaded parts. Replaces the classic washers, grover, rosettes.

• HIGH RESISTENCE: Permanent assembly. Disassembly possible only up to heating parts.
• Max thread diameter - Max diametral game: M5 - 0.07 mm
• VISCOSITY (+ 25 ° C MPa S): 10-20 low thixotropia
• COLOR:GREEN
• Hardening time Handling minutes: 10-20
• Functional hardening time hours:1-3
• Torgent moment (ISO 10964) N M initial: 10-25
• Torgent moment (ISO 10964) N M Residue: 25-40
• Scroll resistance (ISO 10123) N / mm2: 8-12
• Employment temperature ° C: -55 / +150

Suitable for braking and widespread porosity sealing, welding ratchets and threaded joints already assembled and / or in the case of links with extremely contained games. Resists water, oil and gasoline, methane gas and LPG, compressed air, refrigerated fluids and a variety of chemicals. Resists vibrations, thermal changes and aging.

Instructions for Use

For an optimal result, here are some precautions to keep in mind:
1. Before assembling cleaning and drying the surfaces with the 10 spray cleaner.
2. If the hole is passing, apply the adhesive to the bolt in the clamping area of ​​the nut; If the hole is blind, apply a few drops directly into the hole.
3. Tighten by giving the required screw torque and leave the adhesive for the minimum time required to reach the functional resistance before submitting the piece to stress and loads.
4. In the case of extended hardening times, LoxEl activator 11 can be applied on a surface; Allow to dry and proceed as specified in point 3.
For further clarifications about applications to contact LoxEAL technical service.